Full Automatic 20T Tube Ice Machine Making Ice 170KW

Main Features:

1. Refrigerant gas: R404A,R22,R507

2. The exterior insulation structure of ice tube evaporator,anti-corrosion, more energy save and production

3. Adopt high efficiency heat transfer tube to optimize the design of refrigeration system . It is stable operation and low breakdown;

4. Fast speed ice making

5. Adopt double circuit ice doffing type, ice doffing fast , system impact small, more efficient and more safe

6. For our tube ice machine, its ice cutter could be easily dismantled or replaced as a whole, and its water reservoir adopts an open structure to facilitate cleaning and disinfection.

Decription:

1. With the unique water distribution pan and air mouth, pure water evenly flows to the tube wall of the evaporator spirally, which improves the efficiency of heat transfer.

2. Tube ice is a kind of hollow cylindrical ice with external diameter ø22,ø29,ø35mm and length 25~42mm,
crystal and transparent with long storage period.
The hole diameter is usually ø5~10mm and it can be adjusted according to ice making time.

3. Self-design, self-production, optimize every processing works, make the machine a perfect performance.

4. With an optimized structural design, this tube ice generator not only has simple structure and high reliability, but also fits for container transportation for overseas clients.

5. The part contact with ice is stainless steel , safe and sanitary

Specification:

Product Advantage:

1. The machine adopts the integrated design, compact structure, easy installation and use

2. We adopt world-famous brand components,to ensure ice machine’s running steady running

3. Safety and Hygiene:Evaporator materials are made of stainless steel 304 and other materials, reaching the international health standards.

4. PLC are adopted for tube ice maker to realize one-key operation.Several sets of large system in parallel connection can be centrally controlled with remote control interface.

5. High reliability and low fault failure

80% components of the tube ice maker system are world famous brand.Through decades of research and practice,it can run continuously without fault and keep good run and stable ice output even in ambient temperature 5°C-40°C.Special designed machine can even allow normal run in the most atrocious conditions(-5°C-+56°C)

6. Perfect Design:

All the equipment adopts CAD-3D simulation assembly, which makes the arrangement of equipment parts and accessories and the direction of pipes more reasonable, compact structure and not crowded, and more humanized operation and maintenance.

7. Efficient Performance:The evaporator adopts special processing technology, which makes the evaporator have better thermal conductivity.

Product detailed:

Tube ice machine-Bitzer compressor

To facilitate installation and shipment, Icesnow large capacity tube ice machine features modular design. The whole unit consists of 3 parts, compressor module, evaporator module and cooling tower module. Compressor module: Compressor, water condenser, reservoir, liquid receiver, oil separator, and electric control box are all installed on the steel frame.

Tube ice machine-Electronic components

(1) The tube ice machine adopts the integrated design, compact structure, easy installation and use;
(2) PLC man-machine interface computer module, ice making and ice automatically switches off, save time and effort;

Tube ice machine-Water cooled condenser

(1) Tube ice machine, operates on an intermittent cycle, for example 18 minutes ice making and 3 minutes ice harvesting per cycle based on external diameter of 35mm specification ice tube;
(2) The internal diameter of tube ice can be adjusted according to ice making time;

Icesnow Tube ice machine-Cooling tower

All small type water-cooled tube ice machines are designed as integral type. Water in the cooling tower is delivered by pump into condenser. The temperature goes high after it exchanges heat with refrigerant. Then the high temperature water is delivered back to the top of cooling tower for cooling. The cooled water recycled to the sunk below and be used again. In the process of heat dissipation, some water will be evaporated into the air. Hence, cooling tower needs constant water supply when ice machine is running. Cooling tower usually be placed at outside ventilation place. Some water and vapor will be ejected out around of the cooling tower. So please pay attention to its environment when install it.

Application:

1. Add ice to drinks;
2. Fresh and refrigerated seafood and aquatic products;
3. Fresh vegetables and fruits;
4. Cooling for medicine and chemical industry;
5. Industrial cooling.

FAQ:

1. How to deliver?
Dear customer, we can send by Express, by Sea and by Air.

2. Are you add refrigerant in the ice machine?
Yes, the machine is full of refrigerant, once with water and electric it can work. yes, ice machine leaves factory with carefully examination after it was produced for 3 to 5 days. And when we install them at customer’s factory, we retest the ice machines.

3. Does your price is competitive?
Dear customer, we make sure to offer you the best quality with competitive price.

4.How can I choose the suitable one?
Dear customer, please tell us your detailed requirements by mail or online, we will recommend the suitable one as your request.